Briques techniques
gtbmodbus
Catalogue Modbus
Catalogue ouvert de devices Modbus — registres, types, échelles, RTU/TCP.
- rtu
- tcp
- registres
schneider
electric-em3502-em3550
Compteur électrique RTU 50 registres À vérifier
À vérifier
- Source upstream : tuto tiers, vérifier les registres
- Pas de config RTU/TCP fournie en amont
- Ordre d'octets (word order) non spécifié — défaut AB-CD, vérifier sur datasheet
Registres (50/50)
| scale | unité | ||||||
|---|---|---|---|---|---|---|---|
| 0x0002 (2) | holding | Total-instantaneous-real-power-(3-phase-total) | uint16 | kW | R | ||
| 0x0003 (3) | holding | Total-instantaneous-reactive-power-(3-phase-total) | uint16 | kVAR | R | ||
| 0x0004 (4) | holding | Total-instantaneous-apparent-power-(3-phase-total) | uint16 | kVA | R | ||
| 0x0005 (5) | holding | Total-power-factor-(total-kw-/-total-kva) | uint16 | Ratio | R | ||
| 0x0006 (6) | holding | Voltage,-L-l,-average-of-3-phases | uint16 | Volt | R | ||
| 0x0007 (7) | holding | Voltage,-L-n,-average-of-3-phases | uint16 | Volt | R | ||
| 0x0008 (8) | holding | Current,-average-of-3-phases | uint16 | Amp | R | ||
| 0x0009 (9) | holding | Real-power,-phase-A | uint16 | kW | R | ||
| 0x000A (10) | holding | Real-power,-phase-B | uint16 | kW | R | ||
| 0x000B (11) | holding | Real-power,-phase-C | uint16 | kW | R | ||
| 0x000C (12) | holding | Power-factor,-phase-A | uint16 | Ratio | R | ||
| 0x000D (13) | holding | Power-factor,-phase-B | uint16 | Ratio | R | ||
| 0x000E (14) | holding | Power-factor,-phase-C | uint16 | Ratio | R | ||
| 0x000F (15) | holding | Voltage,-phase-A-B | uint16 | Volt | R | ||
| 0x0010 (16) | holding | Voltage,-phase-B-C | uint16 | Volt | R | ||
| 0x0011 (17) | holding | Voltage,-phase-A-C | uint16 | Volt | R | ||
| 0x0012 (18) | holding | Voltage,-phase-A-N | uint16 | Volt | R | ||
| 0x0013 (19) | holding | Voltage,-phase-B-N | uint16 | Volt | R | ||
| 0x0014 (20) | holding | Voltage,-phase-C-N | uint16 | Volt | R | ||
| 0x0015 (21) | holding | Current,-instantaneous,-phase-A | uint16 | Amp | R | ||
| 0x0016 (22) | holding | Current,-instantaneous,-phase-B | uint16 | Amp | R | ||
| 0x0017 (23) | holding | Current,-instantaneous,-phase-C | uint16 | Amp | R | ||
| 0x0019 (25) | holding | Frequency-(derived-from-phase-a) | uint16 | Hz | R | ||
| 0x001A (26) | holding | Apparent-energy-consumption-(msr) | uint32 ×2 | KVAh | R | ||
| 0x001C (28) | holding | Reactive-energy-consumption-(msr) | uint32 ×2 | KVARh | R | ||
| 0x001E (30) | holding | Apparent-power,-phase-A | uint16 | kVA | R | ||
| 0x001F (31) | holding | Apparent-power,-phase-B | uint16 | kVA | R | ||
| 0x0020 (32) | holding | Apparent-power,-phase-C | uint16 | kVA | R | ||
| 0x0021 (33) | holding | Reactive-power,-phase-A | uint16 | kVAR | R | ||
| 0x0022 (34) | holding | Reactive-power,-phase-B | uint16 | kVAR | R | ||
| 0x0023 (35) | holding | Reactive-power,-phase-C | uint16 | kVAR | R | ||
| 0x0024 (36) | holding | Total-real-power-present-demand | uint16 | kW | R | ||
| 0x0025 (37) | holding | Total-reactive-power-present-demand | uint16 | kVAR | R | ||
| 0x0026 (38) | holding | Total-apparent-power-present-demand | uint16 | kVA | R | ||
| 0x0027 (39) | holding | Total-real-power-max.-demand | uint16 | kW | R | ||
| 0x0028 (40) | holding | Total-reactive-power-max.-demand | uint16 | kVAR | R | ||
| 0x0029 (41) | holding | Total-apparent-power-max.-demand | uint16 | kVA | R | ||
| 0x002A (42) | holding | Pulse-counter-1-(real-energy) | uint32 ×2 | R | |||
| 0x002C (44) | holding | Pulse-counter-2-(reactive-energy) | uint32 ×2 | R | |||
| 0x002E (46) | holding | Real-energy-consumption-phase-A | uint32 ×2 | kWh | R | ||
| 0x0030 (48) | holding | Real-energy-consumption-phase-B | uint32 ×2 | kWh | R | ||
| 0x0032 (50) | holding | Real-energy-consumption-phase-C | uint32 ×2 | kWh | R | ||
| 0x0081 (129) | holding | Single-phase:-A-+-N | uint16 | R | |||
| 0x0082 (130) | holding | Ct-ratio-primary | uint16 | Amps | R | ||
| 0x0083 (131) | holding | Ct-ratio-secondary-interface-(1-or-1/3-v,-may-not-be-user-configurable) | uint16 | R | |||
| 0x0084 (132) | holding | Pt-ratio:-the-meter-scales-this-value-by-100-(i.e.-entering-200-yields-a-potential-transformer-ratio-of-2:1).-the-default-is-100-(1.00:1),-which-is-with-no-pt-attached.-set-this-value-before-setting-the-system-voltage-(below) | uint16 | R | |||
| 0x0085 (133) | holding | System-voltage:-this-voltage-is-line-to-line,-except-for-system-type-10-which-is-line-to-neutral.-the-meter-uses-this-value-to-calculate-the-full-scale-power-for-the-analog-outputs-and-pulse-configuration-(below),-and-as-full-scale-for-phase-loss-(register-142).-the-meter-will-refuse-voltages-that-are-outside-the-range-of-82-660-volts-when-divided-by-the-pt-ratio-(above) | uint16 | R | |||
| 0x0086 (134) | holding | Theoretical-maximum-system-power:-this-read-only-value-is-the-theoretical-maximum-power-the-meter-can-expect-to-see-on-a-service.-this-value-is-100%-of-scale-on-the-analog-output-(0-5-vdc-or-4-20-ma),-if-equipped.-the-meter-recalculates-this-value-if-the-user-changes-the-ct-size,-system-type,-or-system-voltage.-this-integer-value-has-the-same-scale-as-other-integer-power-registers-(see-register-140-for-power-scaling) | uint16 | kW | R | ||
| 0x0088 (136) | holding | Display-units:-0-=-iec-(u,-v,-p,-q,-s),-1-=-ieee-(default:-vll,-vln,-w,-var,-va) | uint16 | R | |||
| 0x0089 (137) | holding | Scale-factors-note:-these-registers-contain-a-signed-integer-that-scales-the-corresponding-integer-registers.-floating-point-registers-are-not-scaled.-scaling-is-recalculated-when-the-meter-configuration-is-changed | int16 | R |